Basic Pizza Dough Recipe (made in food processor) - Home Cooking Memories (2024)

Jump to Recipe

My favorite way to use my food processor is to make pizza dough. Ever since buying my Cuisinart, I’ve been making this basic pizza dough recipe.It’s really easy and it doesn’t require kneading or rising.


When I received my Cuisinart food processor for my birthday in 2010, I was so excited about it that I did something I’ve hardly ever done with a kitchen appliance: I read the manual. And, I read the little cookbook of food processor recipes. I even watched the DVD that came with it. I wanted to know everything about my new Cuisinart and, well…I wanted to make sure I didn’t break it.

Over a year later, I use it almost daily and it’s still my favorite thing in my kitchen.

While I do so much with my Cuisinart, one of the things I do the most is make pizza dough in it. In the recipe booklet, I saw a recipe for making it and now this is usually how I make it.

The first step is to stir yeast and sugar into warm water. The actual recipe calls for a package of yeast, but I buy my yeast in bulk so I measure 2 1/2 teaspoons, instead of the package. In the food processor, with the metal blade inserted, you’ll briefly pulse together 3 1/3 cups all-purpose flour and 1 1/4 teaspoons of salt. Just enough to combine them.

The yeast stands for about 10 minutes until it’s all foamy.

Turn on the machine and then pour the year mixture into the feed tube. The mixture will stream slowly into your flour.

After about 45 seconds or so, the dough will form a ball and pull away from the sides of the bowl. At this point, I turn it off and get my olive oil ready. Turn the power back on and immediately pour the oil into the feed tube and process for another minute. If you don’t have olive oil, you can use another oil, but I prefer olive oil. If you’d like, you can also use flavored olive oils – I’ve used a garlic olive oil and a basil olive oil and both made the crust very flavorful.

Very carefully remove your dough from the bowl (watch out for that blade!). The result is a nice, soft pizza dough. This is enough to make two 14″ pizza crusts. It’s bit less than 2 lbs of dough.

If I am making the 14″ round pizzas, I cut the dough in two and I begin stretching one of the portions. The Cuisinart recipe booklet recommends rolling it out on a floured surface, but I never do that. I hold the dough up and begin stretching it evenly, allowing gravity to help pull it. I don’t try to get it large enough to cover the pizza pan, just stretched a bit. Then, I lay it in the center of the greased pizza pan and work the dough out to the edges with the fingertips. See…no rolling pin needed!

At this point, you have two choices. You can pre-bake your pizza crust and then add the toppings, or you can add your toppings directly on top of the uncooked pizza crust. If you like a crispier crust, or if you dough is thick, I would recommend pre-baking. If yours is not very thick, and you like a softer crust (like I do), you don’t have to pre-bake it.

In this image below, I pre-baked the crust at 425 degrees F for about 6 minutes. You’ll also notice that I poked the crust with a fork a few times before baking. This helps it from bubbling up.

This pre-baked crust is the crust you see in the finished pepperoni pizza. After baking the crust, I stopped it with pizza sausage, Mozzarella cheese, and pepperoni. It returned to the 425 degree F oven for about 10-15 minutes.

In this pesto artichoke pizza below, I didn’t pre-bake the crust. I pressed out the dough on my pizza pan and topped it with a little jar of Trader Joe’s pesto. This was topped with shredded Mozzarella cheese, Trader Joe’s artichoke hearts (quartered), fresh broccoli florets, and sliced onions. I baked it at 425 degrees F for about 15-20 minutes.

Both methods work great; it just depends on what you like best. As you can see, it’s really easy to make your own basic pizza dough in a food processor. I should mention thatI haven’t made this recipe in other processors. If yours doesn’t have a strong motor, you might not be able to do this, but in the Cuisinart, and I’m sure other quality food processors, you should have no problem.

Print

Basic Pizza Dough Recipe (made in food processor) - Home Cooking Memories (11)

Basic Pizza Dough (made in food processor)

5 Stars4 Stars3 Stars2 Stars1 Star

5 from 1 review

  • Author: Brandie Valenzuela
  • Yield: 2 - 14-inch pizza crusts OR 4 - 9-inch pizza crusts OR 1 very large baking sheet pizza crust 1x
Print Recipe

Description

My favorite way to use my food processor is to make pizza dough. Ever since buying my Cuisinart, I’ve been making this basic pizza dough recipe.It’s really easy and it doesn’t require kneading or rising.

Ingredients

Scale

  • 1 package active dry yeast (or 2 1/4 teaspoons)
  • 1 teaspoon sugar
  • 1 1/3 cups warm water
  • 3 1/3 cups all-purpose flour
  • 1 1/4 teaspoons salt
  • 3 teaspoons oil

Instructions

  1. Grease pizza pan(s). Preheat oven to 425 degrees F.
  2. Stir yeast and sugar into the warm water and let stand until foamy, about 10 minutes. Insert metal blade into Cuisinart food processor, and add flour and salt to bowl. Pulse briefly to combine flour and salt.
  3. Turn machine on and pour yeast mixture into feed tube. Process about 45 seconds, until all liquid has streamed into the flour and the dough pulls away from the sides of the bowl. Turn off machine.
  4. With oil ready to be added, turn on machine again and add the oil to the feed tube and process for another minute. If dough is sticking to sides of bowl, you can add another tablespoon of flour, one at a time, until it does leave bowl.
  5. Remove dough very carefully from bowl. If making two 14″ round pizzas, divide the dough in half. Can also be divided into small pizza pans or left intact if making pizza on a a very large baking sheet. Working with the dough for one of the pizzas, lift the dough and begin stretching and pulling, rotating the dough, working all edges. When dough is stretched, but not tearing, lay it in the center of one of the pizza pans. With fingertips, press and work dough out t the edges of the pan. If dough resists, let it rest for a few minutes, and then retry. Poke bottom of pizza crust a few times with the tines of a fork.
  6. If you wish to pre-bake your crust, place it in the over and bake for about 6 minutes. Remove from oven and add toppings as desired. Return to over and continue baking for another 10-15 minutes or until hot and bubbly and crust is browned.
  7. If you don’t wish to pre-bake your crust, add toppings as desired on uncooked pizza dough. Bake in oven for 15-20 minutes, or until hot and bubbly and crust is browned.
  • Category: Pizza
  • Cuisine: Italian

Recipe Card powered byBasic Pizza Dough Recipe (made in food processor) - Home Cooking Memories (12)

Basic Pizza Dough Recipe (made in food processor) - Home Cooking Memories (13)

Basic Pizza Dough Recipe (made in food processor) - Home Cooking Memories (2024)

FAQs

Can you knead pizza dough in a food processor? ›

The rapid action of a food processor's blade can turn dough elastic in just minutes with almost no effort. We've found that dough is properly kneaded when the dough forms a rough, elastic ball that begin to clear the sides of the bowl, which takes only 30 seconds to 1 minute.

What is the best food processor for pizza dough? ›

The Cuisinart food processor can tackle a variety of tasks. The Cuisinart “Custom 14” food processor performs well at a variety of tasks, from chopping onions to slicing tomatoes, but it shines particularly well at kneading pizza dough into a smooth elastic ball.

How to make pizza dough with Kitchenaid food processor? ›

directions
  1. Dissolve yeast in warm water in warmed bowl.
  2. Add salt, olive oil, and 2 1/2 cup flour.
  3. Attach bowl and dough hook, turn to speed 2 and mix 1 minute.
  4. Continuing on speed 2, add remaining flour, 1/2 cup at a time, until dough clings to dough hook and cleans sides of bowl.

Is a food processor or mixer better for pizza dough? ›

Both types of appliances offer powerful help with bread. If speed is your thing, using a food processor for kneading dough edges out the stand mixer ever so slightly because of its lightning-quick speed. If you're making pizza dough for dinner, the food processor is a great go-to.

What blade do you use to make dough in a food processor? ›

Dough Blade

Dough blades are usually made out of plastic and have dull edges meant to turn and pull dough as opposed to cutting into it. You can use it to make fresh breads, pastry crust and pizza dough.

What size food processor do I need for pizza dough? ›

A 6–9 cup food processor is best for:

Puréeing soups, sauces, desserts and dips like roasted garlic cashew dip. Chopping onions, salsa veggies or a nut chocolate medley for parfaits. Kneading dough for pizza crust, biscuits and more.

What is the best food processor for dough making? ›

Best for dough

The Cuisinart 14-Cup Food Processor was the best at making pizza dough and pesto in our tests. The large working bowl, wide feed chute, powerful motor, and high-quality blades can handle everything from slicing and mincing to grating and even pureeing.

Which is better for pizza dough yeast or baking powder? ›

One you add yeast to the dough it is activated, and it slowly releases gas and makes the dough rise. So, in short, baking powder is an okay substitution but you usually need a lot more of it than you would with yeast, and you don't let the dough rise, you mix it up, knead it a bit, and roll it out and bake it.

What yeast is best for pizza dough? ›

No matter the form it's in, any yeast can work well for making pizza dough. It all depends on how much time you want to spend making it, and what kind of flavor you want. For example, sourdough starter will produce a much different-tasking crust than other yeast types.

What is the best flour for kneading pizza dough? ›

The best flour to make pizza dough with is the flour you have in your kitchen right now. Just go for it. Ideally it would be bread flour, but don't be detoured if all-purpose flour is what you've got. If you think you want to go down a serious pizza-making rabbit hole, grab a bag of bread flour, make a few pies.

What is 00 flour in USA? ›

Most “00” flour that we see in the United States is ground from durum wheat and has a mid-range protein content of about 11 to 12%, similar to all-purpose white flour.

Which attachment should you use to make pizza dough? ›

With the help of stand mixer attachments like the Dough Hook or the Sifter + Scale Attachment, you can create handmade-quality pizza dough, bread or pastries, calzones or stromboli.

What speed should you mix pizza dough? ›

Attach the Dough Hook to the stand mixer. Add the rest of the ingredients to the bowl. Mix for 1 minute on speed 2 until a sticky dough forms. Turn the mixer to speed 2 and knead for 8 minutes.

Do you need a special blade to make dough in a food processor? ›

Most food processors come with two blades-- metal and plastic. Most manufacturers recommend using the plastic blade for making bread doughs. By accident and a little trial and error, I found out that the metal blade can be also used and less time is needed to accomplish the kneading.

Which food processor has a dough blade? ›

The Oster® Total Prep 10-Cup Food Processor with Dough Blade makes it easy for you to prepare any meal with confidence. Imagine fresh pizza made at home using the processor's dough blade, as well as the slicing and shredding disc to prepare the toppings!

Can you put flour in a food processor? ›

STEP 4: SET YOUR GRIND ADJUSTMENT

You'll want to start your stand mixer at speed 10. If you're using a blender, turn it on and gradually increase to the highest speed. Your food processor will also mill flour using the highest speed.

Can you use a blender as a food processor for dough? ›

When it comes to more fork-friendly foods— doughs, chunkier chopped items and ingredients that require kneading, slicing or grating, the blender is no substitute for the food processor.

Top Articles
Latest Posts
Article information

Author: Rev. Porsche Oberbrunner

Last Updated:

Views: 6002

Rating: 4.2 / 5 (73 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Rev. Porsche Oberbrunner

Birthday: 1994-06-25

Address: Suite 153 582 Lubowitz Walks, Port Alfredoborough, IN 72879-2838

Phone: +128413562823324

Job: IT Strategist

Hobby: Video gaming, Basketball, Web surfing, Book restoration, Jogging, Shooting, Fishing

Introduction: My name is Rev. Porsche Oberbrunner, I am a zany, graceful, talented, witty, determined, shiny, enchanting person who loves writing and wants to share my knowledge and understanding with you.